Electrical problem
Lighting and fixture electrical repair in Rifle, CO
Lights that flicker, dim when an appliance starts, or fail early are usually telling you something about the circuit rather than the bulb.
The same is true of dimmers that buzz and ceiling fans that hum, wobble on their electrical control, or only work on some speeds.
What may be happening
A loose neutral or connection
One of the most common causes of flicker, and one worth addressing promptly.
Voltage drop under load
Lights that dim when a pump, compressor or heater starts often share an undersized or heavily loaded circuit.
Incompatible dimmers and LEDs
Many flicker and buzz problems come from a dimmer that was never designed for the LED lamps fitted to it.
A failing fixture, driver or ballast
LED drivers and older ballasts fail gradually, which shows up as flicker or early lamp failure.
Fan control and support problems
Fan speed controllers, wiring at the canopy and boxes not rated to support a fan.
Safe next steps
- Try a known-good lamp in the fixture to rule out the bulb.
- Note whether the flicker affects one fixture, one room or the whole house — whole-house flicker should be reported promptly.
- Stop using a fixture or switch that is warm, scorched, buzzing loudly or smells of burning, and call us.
- Do not open fixtures, canopies or switch plates yourself.
- Smoke or fire — call 911 first.
What the electrician checks
- Whether the problem is at the fixture, the switch, the circuit or the service.
- Connections at the fixture, switch box and any shared neutrals.
- Dimmer and lamp compatibility, including minimum load.
- Circuit loading and voltage behaviour when heavy appliances start.
- Box type and support where a ceiling fan or heavy fixture is fitted.
What to expect
- A short conversation about which lights, when, and what else is running.
- Testing to separate a fixture problem from a circuit problem.
- Options explained plainly — sometimes the fix is a compatible dimmer, sometimes it is a connection repair.
- Fixture and dimmer replacement once you have agreed what should be fitted.
Common questions
Questions we hear about this
Get in touch
Tell us what you're working on.
Share a few details about the job and we'll follow up to talk through next steps. If it's urgent, calling is always the fastest way to reach us.
- Phone
- 970-987-0779
Request an estimate
Required fields are checked before sending. We'll get back to you to discuss the job.